Home > BGP + MPLS 642-691 Exam > Drag and Drop Questions

Drag and Drop Questions

Here you will find answers to Drag and Drop Questions

Question 1

Drag and drop the proper command in the proper order to create a MP-BGP session between two PE routers that will be used to support the RED VPN

BGP_neighbor.jpg

 

Answer:

Command 1: router bgp 65001
Command 2: neighbor 172.16.1.2 remote-as 65001
Command 3: neighbor 172.16.1.2 update-source loopback 0
Command 4: address-family vpnv4
Command 5: neighbor 172.16.1.2 activate

Question 2

Drag and drop the proper command in the proper order to configure EBGP as the CE to PE routing protocol for VPN RED on a PE router.

EBGP.jpg

 

Answer:

Command 1: router bgp 65001
Command 2: address-family ipv4 vrf RED
Command 3: neighbor 172.16.1.2 remote-as 65002

Question 3

Drag and drop the proper command in the proper order to redistribute the RED VPN routes from the EIGRP vrf into the BGP vrf

EIGRPvrf_BGPvrf.jpg

 

Answer:

Command 1: router bgp 65001
Command 2: address-family ipv4 vrf RED
Command 3: redistribute eigrp 101

Question 4

Drag the BGP MED function on the left to the command that enables it on the right. Not all apply

BGP_MED.jpg

 

Answer:

bgp deterministic med: Enforce the comparison of MED between all paths received from the same autonomous system
bgp always-compare-med: Allow the comparison of MED for paths from neighbors in different autonomous systems
bgp bestpath med-confed: Enable MED comparison among paths learned from confederation peers

Question 5

CE1A and CE2A belong to the Customer_A VPN. Select the correct command for the PE1 router to establish static routing from PE1 to the CE1A 192.168.1.0/24 network by selecting them from the dropdown menus below. Some of the commands must be entered in the correct order. Also enable propagation of the static route into MP-iBGP. Assume the MP-iBGP session between PE1 and PE2 have been configured already.

BGP_commands.jpg

 

Answer:

1. ip route vrf Customer_A 192.168.1.0 255.255.255.0 10.1.1.2 Serial0/0
2. router BGP 50111
3. address-family ipv4 vrf Customer_A
4. redistribute static

Categories: BGP + MPLS 642-691 Exam Tags:
  1. boom_zoom
    April 16th, 2011 at 01:43 | #1

    all of these were valid.
    tips to avoid confusion….
    if between two PE routers (PE to PE) then its vpnv4
    the rest of the D&D should be ipv4 _____

    Question 5 re CE1A and CE2A belong to the Customer_A VPN – is not really that of a D&D, but merely a drop down type of question.
    be careful because each drop down have many selections that you have to scroll down/up to select the correct answer after clicking the drop down button. i almost screw this up because my answer wasnt there in the selection, and i just noticed the scroll later on. phew!! 🙂

  2. Kadeesa
    July 16th, 2011 at 02:53 | #2

    Can anyone update us please ? are those D&Ds still valid ?
    Thanks

  3. Iq
    December 2nd, 2011 at 14:56 | #3

    yes they are still valid and i passed my exam by 960/1000

  4. CCIP
    December 18th, 2011 at 17:09 | #4

    In Q2. the Answer and the drag and drop options are varying…..though Nothing bug issue.

  5. Amala
    May 15th, 2012 at 03:45 | #5

    Q5. is changed, I was not getting the option for “redistribute static”, rather I got an option of “ip route 192.168.1.0 something”, I passed my exam today with 959/1000. Don’t know where I went wrong. But still I am satisfied I cleared the exam. So be careful while attempting the exam.

  6. Amine
    May 15th, 2012 at 14:58 | #6

    Hi Friends

    Can anyone tell us if the dump made by Gryffen still valid please ? thanks in advance.

  7. Moazmohamed
    May 19th, 2012 at 09:16 | #7

    gonna to write my exam after 3 hours

  8. muneer
  9. Anonymous
    February 11th, 2014 at 19:57 | #9

    download latest dumps from
    9
    t
    u
    t
    .
    w
    e
    b
    s
    .
    c
    o
    m

  1. No trackbacks yet.